Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Streamwood, IL
Gate installation in Streamwood usually comes down to one question: will a new gate swing or slide cleanly on a lot that was laid out in the late 1950s and 1960s, where the side yard is narrow and the fence line is shared with a neighbor. We’re a dedicated gate company working across Streamwood, IL, and we handle the whole job – laying out the opening, setting posts to proper footing depth, hanging the panel, and wiring the operator – so you deal with one trade instead of three. Whether you’re replacing a rotted wooden driveway gate in the original Streamwood tracts or adding an automatic slide gate in 60107, we diagnose what the site actually allows before anything is ordered. Call (833) 722-3856 for a free estimate.
Why Streamwood Homes Are Different
Streamwood grew up as a village of late-1950s to 1970s suburban subdivisions – the original Streamwood core and the Sunnyhill/Glenbrook-area tracts – and that housing era shapes nearly every gate call we take here. Typical stock is single-family ranches and split-levels on modest lots, many with original or second-generation wood privacy fencing, chain-link, and wooden driveway or access gates. Fence lines and gate posts from that era are commonly pressure-treated or untreated pine that has weathered and split, so the work centers on post replacement, hinge re-setting and re-squaring rather than bolting hardware onto sound wood.
The climate does the rest. Chicagoland freeze-thaw cycles – repeated winter thaws and hard freezes – heave and lean fence and gate posts, while summer humidity swells wooden gates until they drag on the ground. Spring storms and snow-load add to the sagging and racking. Then there’s the post-war lot pattern: narrow side yards and shared fence lines between close-set ranches mean a stuck, dragging gate binds the whole property line, not just one yard. Before you plan a new gate, it’s worth checking with the village about permits and any HOA rules that apply to your lot.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Streamwood Services
Two jobs bring most Streamwood homeowners to us: fixing an existing gate that has gone out of square or stopped responding, and putting in a new one built for the lot.
Gate Repair in Streamwood
Most gate repair in Streamwood is aging-wood-and-rusted-hinge restoration, not new installation. A gate that sits at the narrow pinch point between a ranch home and the shared fence line will swell shut in July or heave out of plumb in February, and that traps cars and garbage carts until the post is reset. We diagnose the whole assembly – posts, hinges, bracing, latches – and re-square the opening before we touch the panel. Our technicians have up to 9 years of experience on this exact kind of work. For a full breakdown of gate repair in Streamwood, start there.

Electric Gate Repair in Streamwood
An automatic gate that stops mid-travel or reverses for no reason usually has a control or safety problem, not a mechanical one. We work with Linear, Viking and Ghost Controls operators alongside commercial-grade equipment, and we diagnose the control board, loop detectors, safety edges and wiring before recommending anything. Older Streamwood properties often combine a decades-old mechanical gate with a newer operator, and getting those two to work together takes a technician who understands both halves. See our electric gate repair in Streamwood page if your operator is the problem.

Gate Installation in Streamwood
Gate installation in Streamwood means planning around a lot that was never designed for a wide driveway opening: narrow side yards, shared fence lines, and soil that moves with every freeze-thaw cycle. On a 1950s or 1960s ranch, the gate has to fit an existing gap between the house and the property line, so the layout matters as much as the hardware. That’s the kind of measuring and layout work we do on every gate installation we take on, and it’s why a new gate here often needs a post reset before the panel ever goes up.
Automatic Gate Installation
Signs you need it
You’re tired of getting out in the cold to open a manual gate, or you want a driveway gate that closes behind the car without a second trip.
What it costs in Streamwood
A typical automatic gate installation runs $2,800 to $7,500 here, depending on the operator tier and whether the opening needs new posts; the written estimate sets the final price.
How we do it
We measure the opening, set or reset the posts to proper footing depth, hang the gate, mount the operator, then test travel, limits and safety edges before we call it done.
Driveway Gate Installation
Signs you need it
The existing driveway gate is split, sagging or dragging on the ground, and re-hanging it would cost more than it’s worth on rotted pine posts.
What it costs in Streamwood
Expect a typical range of $1,500 to $4,000 for a new driveway gate, with wood and ornamental metal at different points in that band; the written estimate is what you pay.
How we do it
We confirm the clear opening against your vehicles, choose a panel weight the posts can carry, set the posts, then hang and brace the gate so it clears the ground through a full swing.
What Gate Installation Costs in Streamwood
| Item | Typical range in Streamwood |
|---|---|
| Automatic gate installation (gate plus operator) | $2,800 – $7,500 |
| Driveway gate installation | $1,500 – $4,000 |
| Electric gate installation (operator, wiring, safety edges) | $2,200 – $6,500 |
Do I need a permit for a new gate in Streamwood?
Often yes, depending on height and location, so ask the village building department before work starts. We’ll tell you what the install involves so you know what to ask about, and the price is agreed in writing first.
Can a new gate be built for a narrow side yard in Streamwood?
Yes. That’s the standard situation in the older subdivisions, and it’s why we measure the clear opening first. A swing gate can be sized to a tight gap, or a slide gate considered where there simply isn’t room to swing.
Brands We Service in Streamwood
We work on your brand, not just the one we happen to sell. Our technicians are familiar with Linear, Viking, Ghost Controls and DoorKing operators across residential and commercial tiers, from a homeowner remote to a property manager’s access-control setup. Parts vary by model, so turnaround depends on what the diagnosis turns up. Take a look at our brands for the full picture.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Streamwood, IL
| Service | Typical range in Streamwood |
|---|---|
| Automatic gate installation | $2,800 – $7,500 |
| Driveway gate installation | $1,500 – $4,000 |
| Electric gate installation | $2,200 – $6,500 |
| Gate repair (hinge, latch, re-square) | $150 – $600 |
| Gate post replacement | $250 – $900 |
| Electric gate repair (control board, sensors) | $200 – $800 |
| Operator replacement | $900 – $2,800 |
| Safety edge and loop detector work | $200 – $700 |
Two things push price up most in Streamwood: posts that have rotted below grade and need full replacement rather than a re-set, and older operators that need wiring brought up to current safety standards. Every price is quoted and agreed before any work starts, so the number on the estimate is the number you pay unless you approve a change first.
Neighborhoods We Serve in Streamwood
We work throughout Streamwood, from the original village core near the older Sunnyhill and Glenbrook-area tracts out to the newer edges of town. The side-yard gate at the pinch point between a ranch and a shared fence line is the call we get most, and it’s the one that needs a post reset rather than a patch. One response note covers the whole village: we answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
- Original Streamwood
- Sunnyhill
- Glenbrook-area tracts
- Surrounding residential blocks in 60107
Service Area – Cities Near Streamwood
Streamwood sits in a cluster of villages that share the same freeze-thaw soil and the same post-war ranch stock, so the work travels well. We also cover South Elgin, IL, Elgin, IL, Carpentersville, IL and St. Charles, IL, with the same gate-only focus and the same written estimate before work begins. If you’re just outside Streamwood, call and we’ll confirm coverage.
Serving Streamwood, IL – Our Local Coverage Area
We serve Streamwood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Streamwood
Same-day service is often possible for repairs. We answer 24/7, and a call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. New installations are measured and scheduled.
Permits depend on the gate’s height and placement, so check with the village building department, and check your HOA rules if you have one. We’ll lay out what the install involves so you know exactly what to ask about.
Yes. We cover Streamwood from the original core out through 60107, plus South Elgin, Elgin, Carpentersville and St. Charles. Call (833) 722-3856 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What Streamwood Customers Say
"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
- Carrie Delaney"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
- Travis Sutton"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
- Brianna Grant